Full Product List (416)

BONDERITE C-AK 5800 Clear, colorless, alkaline industrial spray cleaner for parts with high degreasing performance on cast iron, steel and plastic parts which also provides temporary rust prevention.
BONDERITE C-IC 3293 ACID CLEANER BONDERITE C-IC 3293 (known as POLYPREP CLEANER 3293) is an acidic cleaner formulated primarily for cleaning
BONDERITE C-IC 7005 ACID CLEANER BONDERITE C-IC 7005 (known as AQUENCE 7005) Cleaner is an acidic composition, which when diluted with water,
BONDERITE C-MC STC 104 MAINTENANCE CLEANER General maintenance cleaner
BONDERITE C-MC STC 116 MAINTENANCE CLEANER BONDERITE C-MC STC 116 (known as P3 SAF-T-CLEAN 116) is a non-methylene chloride, low foaming, low V.O.C. paint remover for uncured paint. This stripper does not contain chlorinated solvent or naphthalene. It is usually applied by mop and bucket to the interior walls and floor of a spray booth and surrounding area. If preferred, BONDERITE C-MC STC 116 (known as P3 SAF-T-CLEAN 116) may be applied by brush or other suitable means.
BONDERITE C-NE 200 Neutral-based in-process cleaner with corrosion inhibitors designed for in-process corrosion protection on ferrous and aluminum alloys.
BONDERITE C-NE 3300 Clear, light-yellowish, neutral, water-based industrial parts liquid cleaner which contains organic corrosion inhibitors suitable for a range of processes and multi metals.
BONDERITE C-SO 283 Blended solvents
BONDERITE C-SO 307 SOLVENT CLEANER BONDERITE C-SO 307 (known as PARCOSOL 307) is a HAP’s compliant (Hazardous Air Pollutant) 60 F flash point
BONDERITE C-SO 577 WB WATER BORNE SOLVENT BONDERITE C-SO 577WB (known as PARCOSOL 577WB) is a HAP’s Free Low VOC water soluble proprietary activator / amine purge blend used for internal and external cleaning of waterborne paint application equipment.
BONDERITE C-SO PAINT 200 SOLVENT PAINT LINE CLEANER Water-based, paint line cleaner
BONDERITE L-FG 345 ACHESON GRAPHITE FORGING LUBRICANT Water soluble semi-synthetic lubricant used for hot forging steel parts
BONDERITE L-FG 4258 GRAPHITE FORGING LUBRICANT ACHESON Water dilute-able lubricant used when hot forging steel parts
BONDERITE L-FM 360 BODYMAKER COOLANT ACHESON Biostable bodymaker coolant for drawing and ironing of aluminum beverage cans
BONDERITE L-FM C1-A CUPPER LUBRICANT ACHESON Cupper lubricant for drawing and ironing of aluminum beverage cans
BONDERITE L-FM I-102 BODYMAKER COOLANT ACHESON Biostable bodymaker coolant for drawing and ironing of aluminum beverage cans
BONDERITE L-GP 39SY20 (235 PENT) GEAR MARKING COMPOUND Pigmented lubricant for checking the alignment of matched gear sets
BONDERITE L-GP 4141 CORROSION INHIBITOR High flash, low residue rust preventative
BONDERITE L-GP 5800 CORROSION INHIBITOR Soluble oil rust preventative for long term storage
BONDERITE L-MR 5600D MACHINING LUBRICANT High lubricity soluble oil coolant for multi-metal applications
BONDERITE M-CR 1132 CHROMATE COATING PENS  A convenient felt-tipped conversion coating repair tool.
BONDERITE M-CR 1402 W DR200KG Chrome dried in place pretreatment
BONDERITE M-CR T 5900 TONER CHROMATE COATING Used to build up the BONDERITE M-CR T 5900 TONER CHROMATE COATING bath
BONDERITE M-NT 1 Green alternative to conventional iron phosphate used on steel, zinc and aluminum surfaces.
BONDERITE M-NT 404 CONVERSION COATING Conversion coating process for formed aluminum cans
BONDERITE M-PA 915 AUTODEPOSTION PAINT Economical, medium gloss, environmentally friendly corrosion protection coating for steel parts and structures
BONDERITE M-PT 3416A REACTION RINSE Appearance enhancing seal rinse technology
BONDERITE M-ZN 181X MU ZINC PHOSPHATE
BONDERITE M-ZN 3140MS ZINC PHOSPHATE One of a series of high performance, single component, semiconductor encapsulants for chip-on-board applications.
BONDERITE M-ZN 910 ZINC PHOSPHATE Formulated for spray application on multi-metal substrates prior to electrocoating.
BONDERITE M-ZN 952 Clear, environmently friendly, tricationic zinc phosphate surface pre-treatment liquid coating for metals. Excellent adhesion and corrosion resistance properties. Quick process.
BONDERITE O-TO 342 NON CHROME COATING Non-chrome acrylic for long term passivation of galvanized and galvalume substrates
BONDERITE S-OT HI-LITE 2495 ACHESON DEFECT HI-LIGHTER operate over a fairly wide temperature range of 110° Fahrenheit to 160° Fahrenheit and can be used for both spray and
BONDERITE S-PD 810 Neutral coagulant for detacking over-sprayed solvent-based paints. Contains corrosion inhibitor.
BONDERITE S-PD 828 Neutral coagulant for detacking over sprayed water-based and solvent-based paints. Best applied in low concentrations.
BONDERITE S-PR 6776 Clear, yellowish, industrial dip/spray liquid parts pre-machining cleaner for and post-machining corrosion protection for long term storage. Suitable for multi-metals.
BONDERITE S-ST 200 WB WATER BORNE PAINT STRIPPER A water-based, thickened paint stripper for removing uncured paint from the walls, windows, grates and floors of spray booths and paint rooms
BONDERITE S-WT DEFOAMER 2491 WATER TREATMENT Paint detackifier
Chemacid 3500
Frekote 710-LV Mold Release Agent
Frekote B-15 Mold Release Sealer Sealer for molds with microporosity problems, small surface scratches or imperfections
Granocoat ZE
Hysol EA 9689
Hysol EE8200 / EB80363
Hysol ES0617, Part B
Hysol ES0618
Hysol ES0619
HYSOL ES1000 Black, low cost, flexible, capable of UL94HB, resistant to thermal shock, non-abrasive filled, high impact strength, long pot life
Hysol ES1001
Hysol ES1003
Hysol ES1005
Hysol ES1300
HYSOL ES1301 Long working time, excellent imprognation of fine windings
HYSOL ES1900 Clear, low shrinkage, excellent chemical resistance, strong bond to substrates
HYSOL ES1901 Tough, fast setting, optically clear, low viscosity, room temperature curing, chemical resistant, industrial grade epoxy adhesive potting/encapsulating material.
Hysol ES2200
Hysol ES2201
HYSOL ES2202 Withstands high heat distortion temperature. Excellent chemical resistance, excellent performance under high moisture and humidity.
Hysol ES2203
Hysol ES2204
Hysol ES2205
Hysol ES2206
HYSOL ES2207 High heat distortion temperature, low expansion, dimensionally stable
HYSOL ES2500 Black, fast gel, capable of UL1446 to 180C and UL94HB at 6mm, Easy handling, resilient
Hysol ES2501
Hysol ES2502
Hysol ES4212
Hysol ES4512
Hysol ES6005
Hysol ES6020
Hysol FP4531 Hysol FP4531 is a snap cure fast flow, non-reworkable underfill for CSP applications.
Hysol GR2710 Hysol GR2710 is a gold, low stress/non-flame retarded molding powder, for tantalum and ceramic capacitors, leaded or surface-mounted sensors.
Hysol GR725-AG
Hysol HL100-3
Hysol OS1600
Hysol OS4210
Hysol PC12-007M
Hysol PC20M
Hysol PC29
Hysol PC55
HYSOL QMI168 Silver filled conductive adhesive for attachment of integrated circuits and components to metal leadframes, designed for high volume production applications.
HYSOL QMI2419M No dry Ag/glass die attach for glass seal packages
HYSOL QMI505MT Silver filled conductive adhesive for attachment of integrated circuits and components to advanced metal and ceramic substrates
Hysol QMI516 Silver filled conductive adhesive for attachment of integrated circuits and components to advanced substrates
HYSOL QMI529LS Low stress, silver-filled, low bleed conductive die attach adhesive specifically recommended for Ag/Cu and bare Cu lead frame applications
HYSOL QMI529NB Silver-filled, no bleed conductive, UV curable die attach adhesive specifically recommended for NiPdAu leadframe applications
HYSOL QMI536UV
HYSOL QMI600 For stacked die application where the bonding wires go through the die attach paste and mold compound.
Hysol US5520
Hysol US5544
Hysol® DK42TM
Hysol® EA 934NA™
Hysol® EA 9359.3™
Hysol® EA 9360™
Hysol® EA 9361™
Hysol® EA 9371™
Hysol® EA 9377™
Hysol® EA 9380™
Hysol® EA 9392™
Hysol® EA 9394.2™
Hysol® EA 9394/C-2™
Hysol® EA 9394™
Hysol® EA 9395™
Hysol® EA 9396.6MD™
Hysol® EA 9396/C-2™
Hysol® EA 9396™
Hysol® EA 956™
Hysol® EA 9602.3™
Hysol® EA 960F™
Hysol® EA 9628H™
Hysol® EA 9657™
Hysol® EA 9673™ (BMI)
Hysol® EA 9686™
Hysol® EA 9815™
Hysol® EA 9833.1™ (BMI)
Hysol® EA 9895™
Hysol® ES0613TM
Hysol® FP4548FC™
Hysol® MG15F-0140RTM
Hysol® OP2000TM
Hysol® OP3000TM
Hysol® OS2902TM
Hysol® PC18MTM
Hysol® PC28STDTM
Hysol® PC30STDTM
Hysol® PL 460™
Hysol® PL 639™
Hysol® PL 663™
Hysol® PL 685™
Hysol® PL 7000™
Hysol® PL 737™
Hysol® PL 777-1FR™
Hysol® PL 777™
Hysol® PL 780-1™
Hysol® PL 795-1™
Hysol® PL 795™
Hysol® TF 3056FR™
LOCTITE 243 Threadlocking Adhesive - medium strength. General purpose. Suitable for all metal threaded assemblies.
LOCTITE 3051 Light Cure Medical Device Adhesive LOCTITE 3051 is designed for bonding cannulae into hubs, syringes and lancets.
LOCTITE 3100 Light Cure Adhesive Acrylic, low modulus, high viscosity, UV/V light cure adhesive.
Loctite 3101 Light Cure Adhesive
LOCTITE 3140 Hysol Epoxy Resin, General Purpose Epoxy resin, part of a two part system to be used with a hardener, formulated for general purpose potting and encapsulating
LOCTITE 3142 Hysol Epoxy Resin Epoxy resin, part of a two part system to be used with a hardener, formulated for thermally conductive potting and encapsulating
LOCTITE 3184 Hysol Polyurethane Hardener, Flame Retardant Polyurethane hardener, part of a two part system to be used with a resin, formulated for flame retardant potting and encapsulating
LOCTITE 3355 Light Cure Adhesive, Pre-Activated Epoxy Semi-flexible, UV/Visible light activated epoxy; delay curing, one-part, extremely low shrinkage, low outgass, and acid free
LOCTITE 3407 OptiLOC Fiber Optic Adhesive, Silicone/Heat Cure One part, heat cure silicone
Loctite 3478 2-part, ferro-silicon filled epoxy resin system. Extremely resistant to corrosion, chemical attack and abrasion.
LOCTITE 3509 One component heat cure epoxy designed for use as board level cornerbond for IC packages such as CSP's and BGA's.
LOCTITE 3517 1L ENCHJP One part, heat curable epoxy. It is designed for use as a reworkable CSP (FBGA) or BGA underfill for protection of solder joint against mechanical stress when used for hand held electronics devices.
LOCTITE 3518 50ML MUS One part, heat curable epoxy, designed as non-reworkable CSP/BGA underfill for protection of solder joint against mechanical stress when used for hand held electronics devices
LOCTITE 3549 30ML EFD EN/CH Next generation reworkable underfill for thermal and mechanical reliability.
Loctite 3552 Indigo Light Cure Adhesive Low viscosity, fluorescing, visible light cure medical device adhesive.
LOCTITE 3553 Indigo Light Cure Adhesive High viscosity, fluorescing, visible light cure adhesive.
LOCTITE 3554 Acrylic, low viscosity, fluorescing, visible light cure adhesive.
LOCTITE 3555 Acrylic, medium viscosity, fluorescing, visible light cure adhesive.
LOCTITE 3629 Designed for the bonding of surface mounted devices to printed circuit boards prior to wave soldering.
Loctite 3651 Hysol Polyolefin Hot Melt Adhesive
Loctite 3693 Resinaid
LOCTITE 382 LOCTITE 382 is a transparent, colorless, general purpose, instant adhesive gel with a fixture time of 20 - 40 secs.
Loctite 3862 Medium viscosity electronic potting system designed to provide superior thermal shock resistance and high thermal conductivity
LOCTITE 3875 PTA 30CC EFD Loctite 3875 is the highest conductivity room temperature cure system.
LOCTITE 3876 PTA 30ML EFD EN

LOCTITE 3876 is the highest conductivity, self-shimming, room temperature cure system.

Loctite 3911 Light Cure Adhesive
Loctite 3912 Light Cure Adhesive
Loctite 3913 Light Cure Adhesive
LOCTITE 3933 Light Cure Adhesive Medium viscosity, thixotropic, fluorescing, UV/V light curing adhesive with sterilization resistance.
Loctite 3941 Light Cure Adhesive, High Performance/Various Substrates Low viscosity, fluorescing, UV/V light curing medical device adhesive with sterilization resistance.
LOCTITE 3944 Light Cure Adhesive Medium viscosity, fluorescing, UV/V light curing biocompatible adhesive.
LOCTITE 3981 Hysol Epoxy Structural Adhesive, High Performance/Various Substrates One-part, heat cure, toughened, highly flourescent, low viscosity epoxy and multiple surface structural adhesive
LOCTITE 3982 Hysol Epoxy Adhesive, High Performance/Various Substrates One-part, heat cure, toughened, highly flourescent, medium viscosity epoxy
LOCTITE 3984 Hysol Epoxy Structural Adhesive One-part, heat cure, toughened, highly flourescent, high viscosity epoxy
LOCTITE 4203 Instant Adhesive, Thermal Resistant Toughened thermally resistant instant adhesive
LOCTITE 4306 Flashcure Light Cure Instant Adhesive Low viscosity instant adhesive, one part, UV/V light fast curing cyanoacrylate.
LOCTITE 455 High viscosity instant adhesive, low odor / low bloom, suitable for porous surfaces and vertical or overhead applications.
Loctite 503 Vibra-Seal
Loctite 5031 Nuva-Sil Silicone Light Cure Potting Compound
LOCTITE 5039 Nuva-Sil Silicone Light Cure Adhesive / Sealant One part, UV or visible light and moisture curing, high speed silicone
Loctite 5085
LOCTITE 509 Flexible, medium strength, low pressure flange sealant fluoresces blue - Top Pick
LOCTITE 5127 Flexible anaerobic gasket, flange sealant.
LOCTITE 5296 Heat cure silicone that can be applied with brush, dip or spray. High reliability automotive. Clear.
LOCTITE 534 Stick Hi-Tack Gasket Dressing No mess, semi-solid, gasket dressing works with all types of gaskets - Top Pick
LOCTITE 548 Gasket Eliminator Semi-solid, ideal for on-the-spot gasket repairs
LOCTITE 5570 Adhesive Elastomeric adhesive based on Henkel's proprietary Flextec technology
LOCTITE 5572 Adhesive One part humidity moisture curing elastic adhesive, silane modified polymer based on Flextec™ Technology.
LOCTITE 5810F High modulus, polyacrylate (ACM), formed-in-place flange sealant with UV tracers, excellent chemical resistance
LOCTITE 5950 Fastgasket Flange Sealant One part UV cure, secondary moisture cure, black
Loctite 5951 Fastgasket Flange Sealant
Loctite 642 Retaining Compound
Loctite 7210
Loctite 7471 Transparent, yellow to amber liquid activator used for increasing the cure speed of LOCTITE anaerobic products under low prevailing temperatures.
Loctite 7515 Amber, water-based, liquid surface treatment that delivers 48-hour protection against flash rust on large surfaces. Straightforward spray and wipe application.
Loctite 7805 Hysol Hot Melt Adhesive
LOCTITE 9459 Hysol Epoxy Structural Adhesive One-part medium viscosity, heat-cure, excellent high temperature performance and chemical resistance, self-leveling, white epoxy, multiple surface structural adheisve
LOCTITE AA 3011 Transparent, amber, UV light-cure acrylic adhesive formulated for fast surface cure. Ideal for plastics and also used for metals and ceramics.
LOCTITE AA 322 UV light-cure adhesive. Delivers very fast curing performance. Well suited to plastics. ISO 10993 qualified.
LOCTITE AA 3301 colorless, transparent, instant light-cure universal acrylic-based adhesive. For stress-sensitive plastics with high, on-demand, curing speed.
LOCTITE AA 3341 Transparent, light yellow, light-cure acrylic-based instant adhesive. Highly flexible for soft PVC, with high, on-demand curing speed.
LOCTITE AA 3494 Acrylic, medium viscosity, durable, UV/V light cure adhesive.
LOCTITE AA 3556 Light-cure acrylic-based adhesive. Ideal for colored, transparent plastics. Depth of cure >13 mm. Qualified for medical applications.
LOCTITE AA 3924 LC Medium viscosity, fluorescing, UV/V light curing medical device adhesive with sterilization resistance.
LOCTITE AA 3926 Light-cure, high viscosity acrylic-based adhesive for stress-sensitive plastics. Depth of cure >13 mm. Qualified for medical applications. Rapid fixturing.
LOCTITE AA 3942 Medium viscosity, fluorescing, UV/V light curing biocompatible adhesive with sterilization resistance.
LOCTITE AA 3943 PA15LEN/SP High Performance/Various Substrates One-part fluorescent UV curing acrylic adhesive
LOCTITE AA 3971 Low viscosity, UV/V light curing medical device adhesve, fluorescing.
LOCTITE AA 3972 LC HO15L One-part fluorescent UV curing acrylic adhesive
LOCTITE AA 5810A High modulus, polyacrylate (ACM), formed-in-place flange sealant with excellent chemical resistance
LOCTITE AA H8600 Structural Adhesive Acrylic high performance, galvanized steel bonder, with an extended fixture time
LOCTITE ABLESTIK QMI2569  A no-dry Ag/glass die attach for glass, solder and seamed sealed packages. Very high thermal conductivity applications for die as large as 0.80 in 2.
LOCTITE ABLESTIK QMI3555R A no-dry Ag/glass die attach for glass, solder and seamed sealed packages.
LOCTITE ABLESTIK QMI536NB High JEDEC performance for first die and die-to-die bonding. Non-conductive and non-damaging to the die face. Can be cured as low as 80°c. No bleed.
LOCTITE Big Foot Low Profile Pedestrian Grade - Safety Yellow Two-component, self-sealing, non-slip, floor and deck coating
Loctite Big Foot Water Based Primer/Sealer
Loctite Color Guard Thinner
Loctite Disc Brake Quiet Stick
LOCTITE DRI STS Pre-applied Threadlocker / Thread Sealant
LOCTITE EA 2000 AERO Nitrile / phenolic, water based primer
LOCTITE EA 3032 2-part, grey, general purpose epoxy adhesive for bonding a wide variety of materials including metals, composites, ceramics and wood.
LOCTITE EA 3473 Fast Set Steel Putty
LOCTITE EA 3985 Hysol Epoxy Adhesive, Non-sag One-part, heat-cure, toughened, non-sag, high viscosity, motor armature bonding epoxy, multiple surface structural adhesive
LOCTITE EA 4108 1-part, metal-filled, structural bonding epoxy adhesive providing maximum resistance to all loads. Excellent chemical and high temperature resistance.
LOCTITE EA 795SF 42IN X 125FT 438SF Composite surfacing film, epoxy
LOCTITE EA 9150 RTM resin, 250°F/121°C service, epoxy, two component
LOCTITE EA 9203 AERO Adhesion promoting coating, room temperature cure
LOCTITE EA 9258.1 GAL AERO High temperature, water-based, chromated adhesive primer
LOCTITE EA 9299 2-part, amber epoxy designed for food/water industry applications. Shows good adhesion to wet fibres in the production process. KTW approved.
LOCTITE EA 9309.3NA 122GR AERO Toughened paste, high peel, two component, ambient cure, 180°F/82°C service
LOCTITE EA 9313 AERO Toughened paste, high peel, two component, ambient cure, 180°F/82°C service
LOCTITE EA 9320NA AERO Toughened paste, high peel, two component, ambient cure, 180°F/82°C service
LOCTITE EA 9321 50ML AERO Filled paste, 250°F/121°C service temperature, ambient cure
LOCTITE EA 9323 AERO LOCTITE EA 9323 is a filled paste, 250F/121C service temperature, ambient cure
LOCTITE EA 9330 AERO Toughened paste, thixotropic, 180°F/82°C service
LOCTITE EA 9330.3 AERO Toughened paste, thixotropic, 180°F/82°C service
LOCTITE EA 9432NA One-part paste, heat-cure, excellent high temperature performance and chemical resistance, non-sag, surface insensitive epoxy, multiple surface structural adhesive
LOCTITE EA 9628 AERO Metal bond film adhesive, 250°F/121°C service temperature
LOCTITE EA 9658 AERO Film adhesive, high temperature, 420°F/216°C service temperature
LOCTITE EA E-120HP High performance, ultra-strength, non-sag, aerospace grade epoxy with a 120 minute working life
LOCTITE EA E-214HP One-part, heat cure, high temperature resistant, non-sag, grey epoxy
LOCTITE ECCOBOND CB064 High purity, low stress, liquid, self-leveling encapsulant material.
LOCTITE ECCOBOND EO1016 QTX UL94V-0 encapsulant for Smartcards and watch IC's. Nonabrasive filler allows for grinding if necessary.
LOCTITE ECCOBOND EO1062 Hysol EO1062 is a general purpose, high glob version of EO1061.
LOCTITE ECCOBOND EO1072 30CC One component, general purpose, high performance epoxy encapsulant with high Tg and low extractable ionics.
LOCTITE ECCOBOND EO1080 1GALEC Low CTE version of EO1016.
LOCTITE ECCOBOND FP0114 10CC Low viscosity, fast flow, epoxy based material designed for capillary underfill on flip chip applications.
LOCTITE ECCOBOND FP4450 6OZ Industry standard fill material for fills or cavity down BGAs.
LOCTITE ECCOBOND FP4450LV 30CC Low viscosity version of FP4450 (Fills) incorporating cleaner resins.
LOCTITE ECCOBOND FP4460 30ML General purpose, high purity, low stress glob top semiconductor encapsulant with improved moisture resistance and working life compared to earlier generation products.
LOCTITE ECCOBOND FP4470 30CC High adhesion version of FP4450 for 260°C L3 JEDEC performance.
LOCTITE ECCOBOND FP4526 10CC Epoxy underfill is designed for capillary flow on flip chip applications.
LOCTITE ECCOBOND FP4530 10CC Snap cure flip chip underfill for FC on flex. Designed for gap size down to 25 microns.
LOCTITE ECCOBOND FP6101 30CC Reworkable underfill for improvement of mechanical reliability. Fast flow and snap cure for improved process time.
LOCTITE EF 557 AERO Epoxy core splice, 350°F/177°C service temperature
LOCTITE EF 562 AERO Epoxy core splice, 350°F/177°C service temperature
LOCTITE EF 562S 12IN X 24IN 40SF/BOX Epoxy core splice, 350°F/177°C service temperature
LOCTITE EF 562SFR AERO Epoxy core splice film, fire retardant, 350°F/177°C service temperature
LOCTITE EO7038

One-component epoxy potting compound, formulated to protect sensors used in harsh environments, such as automotive applications

LOCTITE Fixmaster 2000° Putty Fluid, self-leveling aluminum liquid.
Loctite Fixmaster Anchor Bolt Grout
LOCTITE Fixmaster Anchor Bolt Grout HP High performance chemical anchor bolt grout
LOCTITE Fixmaster Concrete Repair Epoxy Permanent, concrete repair in a convenient stick.
Loctite Fixmaster Crack Filler
LOCTITE Fixmaster Crack Filler NS Caulking gun grade epoxy concrete crack repair.
LOCTITE Fixmaster Fast Set Grout Grout, self-leveling, non-shrinking, up to 1 deep.
Loctite Fixmaster Wet Surface Repair Putty
LOCTITE FREKOTE 1Step Clear, solvent-based, moisture-cured spray-and-leave, high gloss, gel finish mould release agent for FRP polyester parts; no mould sealer required.
LOCTITE FREKOTE 44NC Clear, solvent-based, moisture-cured, semi-permanent polymer mould release agent which provides multiple release for most moulding processes.
LOCTITE FREKOTE 700NC Clear, solvent-based, moisture-curing, release epoxy for most advanced composites and also polyester resins.
LOCTITE FREKOTE 810NC Non-CFC, semi-permanent, multiple release polymer resin designed to form a semi-permanent release interface on mold surfaces with application temperatures from room temperature to 135°C (275°F).
LOCTITE FREKOTE 909WB Yellow, water-based, alkaline foam cleaner that removes cured release agents and other heavy contaminants from steel, nickel and stainless steel moulds.
LOCTITE FREKOTE 913WB Water-based cleaner for composite and metal moulds. Used for contaminations like finger prints, grease oils, waxes and abrasive particles.
LOCTITE FREKOTE 915WB Water-based cleaner for removing residues from mould surfaces.
LOCTITE FREKOTE B15 Sealer for metal moulds with micro porosity problems, small surface scratches or imperfections.
LOCTITE FREKOTE C200 Water-based release agent designed to provide multiple releases per application with no contaminating transfer.
LOCTITE FREKOTE C600
LOCTITE FREKOTE FMS
LOCTITE FREKOTE FrewaX
LOCTITE FREKOTE FRP-NC
LOCTITE FREKOTE PMC
LOCTITE FREKOTE PUR100 Water-based mould release emulsion for rigid polyurethane applications. Applied in spray form.
LOCTITE FREKOTE R150 Water-based, mould release emulsion that releases standard rubbers and rubber-to-metal parts.
LOCTITE FREKOTE R180 Water-based mould release emulsion whose high slip properties make it ideal for difficult-to-release rubbers and especially highly abrasive compounds.
LOCTITE FREKOTE R220 Water-based mould release emulsion whose high slip properties make it ideal for difficult-to-release rubbers such as EPDM and highly filled elastomers.
LOCTITE FREKOTE S50E Water-based, heat-cured mould release agent that offers excellent slip properties for the most demanding silicone rubber moulding applications.
LOCTITE FREKOTE WOLO Clear, moisture-cured mould release polymer liquid which is wiped on and left on the mould surface and allowed to evaporate.
LOCTITE H4720 Speedbonder Structural Adhesive Acrylic metal bonder, high viscosity, extended fixture time, with superior strength in corrosive environments
LOCTITE H8500 Speedbonder Structural Adhesive Two-part acrylic, high toughness, steel bonder, with a medium fixture time
Loctite Heavy Duty Anti-Seize Stick
Loctite Hi-Tack Stick - Gasket Dressing
LOCTITE HY 4060 GY General purpose structural adhesive that provides a high strength combined with fast fixture at room temperature.
LOCTITE HY 4070 Transparent, cloudy colorless to pale yellow cyanoacrylate/acrylic hybrid gel adhesive that provides a fast fixture at room temperature.
LOCTITE HY 4080 Cyanoacrylate/acrylic hybrid structural adhesive paste that provides toughness and excellent adhesion to metals, composites and plastics.
LOCTITE HY 4080 GY Cyanoacrylate/acrylic hybrid structural adhesive providing toughness and excellent adhesion to metals, composites and plastics.
LOCTITE HY 4090 General Purpose Structural Adhesive

LOCTITE® HY 4090™ General Purpose Structural Adhesive is a combination of an instant adhesive (cyanoacrylate) and structural adhesive (epoxy). This CA epoxy is Henkel's instant adhesive suitable for structural applications.

Best application results are achieved with LOCTITE 50 ml Adhesive Mixing Nozzle (IDH 1826921) and LOCTITE 400 ml Adhesive Mixing Nozzle (IDH 1573135).

LOCTITE LB 8104 Food Grade Grease
LOCTITE LB 8219 Multi-Purpose Grease Extreme pressure, resists water washout, maintains pumpability at low temperatures
LOCTITE LB 8423 Dielectric Grease Provides moisture proof barrier with a high dielectric strength.
LOCTITE LB ML-11 Loctite® ML-11, a light, semi- drying oil type spray that penetrates, lubricates, displaces water, cleans surfaces and provides protection to metal surfaces, to prevent corrosion.
LOCTITE M-11FL Hysol Medical Device Urethane Adhesive Medical device adhesive, low viscosity, flexible, 10 minute working life, ISO 10993 compliant
Loctite Maintain Lubricant Penetrant
LOCTITE No More Leaks Plastic Pipe Thread Sealant Solvent based thread sealant seals plastic pipes and allows easy disassembly - Top Pick
LOCTITE Nonflammable Electrical Contact Cleaner Dries residue-free in seconds
LOCTITE NS 5109 High Temperature Gasket Sealant Slow-setting, non-hardening, high-temperature sealant - Top Pick
LOCTITE PC 3965 Fast Set Steel Epoxy Fast set, cartridge-based, steel-filled, fast, cost effective epoxy.
LOCTITE PC 3967 Stripped Thread Repair Kit Reliable repairs without drills, taps, tools, or inserts
LOCTITE PC 6249 For heavy pedestrian or light rolling traffic
LOCTITE PC 7255 2-part, green/grey, ceramic-filled, sprayable epoxy surface coating that provides a high gloss, low friction surface which is resistant to fine particle abrasion.
Loctite PC 9020 Backing Compound Epoxy system for backing wear metal in gyratory and cone crushers under typical dry service temperatures of -28C to 104C (-20F to 220F).
LOCTITE PC 9599 FAST CURE WEARING COMPOUND Fast cure, trowelable wearing compound
LOCTITE Pipe Joint Compound High temperature, universal pipe and joint compound - Top Pick
LOCTITE Pre-Applied Anti-Seize
LOCTITE PTFE Thread Sealing Tape Non-curing thread sealing tape replaces conventional pipe joint compound and hardening sealants and can be used on all pipe materials.
LOCTITE Resinol 90C 2-Component Heat curing porosity sealant for small volume or intermittent users
Loctite RTV Silicone Blue - Gasket Maker
LOCTITE SF 7633 Non-Chlorinated Parts Cleaner Non-chlorinated parts cleaner, penetrates, dissolves, removes dirt and oil
Loctite SF 7649 Surface Preparation - activator. Solvent-based. Low temperature curing.
LOCTITE SI 5011CL One part RTV silicone neutral curing, non-corrosive.
LOCTITE SI 5033 One part, UV or visible light and moisture curing, high speed silicone
LOCTITE SI 5045 Specifically formulated for bonding, sealing, and coating of components especially for the military, automotive and industrial markets.
LOCTITE SI 5905 RTV Black Silicone Flange Sealant One part RTV silicone, superior flexibility and adhesion, fast depth of cure, black
LOCTITE SI 594 White RTV Silicone Adhesive Sealant One part RTV silicone, general purpose, one-part, cures at room temperature.
Loctite Solventless Anaerobic Activator
LOCTITE STYCAST ES 0614 PTA Undiluted epoxy, low viscosity casting system that exhibits exceptional resistance to impact and thermal shock.
LOCTITE STYCAST ES 1002 DQ Black, low cost, flexible, room temperature cure, lightweight syntactic encapsulant capable of UL94V-0, non-abrasive filled, long pot life.
LOCTITE STYCAST ES 1004 DQ LOCTITE STYCAST ES 1004 DQ is capable of UL94V-0, stable to 155°C.
LOCTITE STYCAST ES 1902 DQ LOCTITE STYCAST ES 1902 DQ is a clear, room temperature cure, transparent, very fast UV gel, excellent dimensional stability and low viscosity; easy to handle.
LOCTITE STYCAST PC 54 5L LOCTITE STYCAST PC 54 is a rapid drying, one-component for acrylic non-atomized spray coating applications. Provides excellent vibration resistance and toughness. Can be removed for repair.
LOCTITE STYCAST US 5529 LOCTITE STYCAST US 5529 is a flexible, flame retardant, mineral filled polyurethane compound.
LOCTITE STYCAST US 5538 PTB LOCTITE STYCAST US 5538 is a flexible, unfilled, potting compound. This system provides low viscosity for good flow and good adhesion to many substrates.
LOCTITE U-09LV Hysol Urethane Structural Adhesive, Low Viscosity Low viscosity, plastic and multiple surface bonder, high peel strength
LOCTITE UK 178 A/B 2-part, yellowish, polyurethane-based casting resin, NSF approved, formulated especially for spiral wound filters (RO) and application to dry substrates.
LOCTITE UK 8126 2-part, polyurethane-based structural bonder which has low viscosity and good penetration properties on laminates e.g. the ski and snowboard industries.
LOCTITE UK 8436 Structural polyurethane adhesive with good adhesion properties and excellent flowability.
LOCTITE UK 8445 B1 W 2-part, solvent-free polyurethane-based potting compound. Mixing both components in a weight ratio of 100:22 produces a hard elastic product. Other potlife variations available on request.
LOCTITE UK U-05FL Urethane Structural Adhesive Fast setting, highly flexible, metal bonder, high strength
Loctite Under Pressure Pipe Repair Kit
LOCTITE Viper Lube Clear High Performance Synthetic Grease Non-flammable, synthetic grease, lasts four times longer than petroleum-based lubricants (clear)
P3 110 Cold Stripper
P3 2226 Maintenance Cleaner
P3 2227A Oven Cleaner
P3 2250 UF E-Coat Cleaner
P3 2255 E-Coat Cleaner
P3 2455 Baffle Coating
P3 2498 Peelable Masking
P3 Forge 185
P3 Forge 4774
P3 Forge 5300
P3 Parco 2407A Detack
P3 Polyprep 2615 Cleaner
P3-saxin 5520
TECHNOMELT AS 5375 Specially formulated for bonding and coating polypropylene or similar polyolefins
TECHNOMELT PA 6208 BLACK Hotmelt adhesive for bonding and low pressure moulding. Suitable for a wide range of substrates with a very short open time for high speed production.
TECHNOMELT PA 633 High-performance thermoplastic, polyamide hot melt adhesive
TECHNOMELT PA 638 BLACK Moldable polyamide with service temperature up to 125°C such as in an automotive firewall
TECHNOMELT PA 641 High-performance thermoplastic, polyamide hot melt adhesive
TECHNOMELT PA 646 Black High performance thermoplastic polyamide designed to meet low pressure moulding process requirements.
TECHNOMELT PA 652 Hotmelt adhesive used for moulding applications, good for low pressure moulding and encapsulation. Good adhesion and cold temperature flexibility. Very short open time.
TECHNOMELT PA 673 Hotmelt adhesive used for moulding applications with good adhesion for higher temperatures such as automotive underhood. Designed to meet low pressure moulding process requirements.
TECHNOMELT PA 678 Hotmelt adhesive used for moulding applications allows encapsulation of fragile components without damage. Designed to meet low pressure moulding process requirements.
TECHNOMELT PA 7901 Low viscosity polyamide
TECHNOMELT PUR 3460 High performance, polyurethane (reactive), moisture curing hotmelt adhesive. Suitable for flat lamination and assembly application.
TECHNOMELT PUR 3631 Toughened, high strength moisture cure, hot melt adhesive
Terocore 16000 Series
Terocore 16100 Series
Terocore Series
Terokal 5011
Terolan 1284 Paint shop body sealer
Terolan 1285 Paint shop body sealer
Terolan 986
Terolan SA-1185A Paint shop body sealer
Terophon 21000 Series
Terophon 22000 Series
Terophon 23000 Series
Terophon 24000 Series
Terophon 2751
Terophon 40000 Series
TEROSON EP 3005 FLANGE BONDING ADHESIVE Structural pre-form weld-throughs
TEROSON EP 4555 B STRUCTURAL ADHESIVE This one-component, solvent-free, impact resistant, heat curable structural resin is a very good all-around adhesive.
TEROSON MS 5510 Adhesive / Sealant Elastomeric adhesive/sealant based on Henkel's proprietary Flextec technology
TEROSON MS 930 GY One part humidity moisture curing elastic sealant, silane modified polymer
TEROSON MS 9371 B WH Used with standard MS products (930, 935, 939, 9360) to create a two component product.
TEROSON MS 9382 BK A high viscosity, sag-resistant, two component adhesive
TEROSON MS 939 BK
TEROSON PU 6700 ME Body Repair – Multi-purpose bonder. 2-component polyurethane with Micro-Emission properties, tack-free time: 30 min.
TEROSON PV 1273 ANTI-FLUTTER ADHESIVE Capable of being applied over oily galvanized and oily cold rolled steel, for application in anti-flutter, spot weld seams, fender, roof bow, body stiffeners and seal hinges, GM approved.
TEROSON PV 1805 ANTI-FLUTTER ADHESIVE Pumpable, Low Expandable, Weld Through PVC Epoxy Based Sealant
TEROSON PV 5918 ANTI-FLUTTER ADHESIVE Expandable body shop sealer and anti-flutter adhesive, GM approved.
TEROSON RB 3221 AA-01 ANTI-FLUTTER Expandable body shop sealer and anti-flutter adhesive, Mercedes approved.
TEROSON RB 351-2B TMM ANTI-FLUTTER ADHESIVE Expandable body shop sealer and anti-flutter adhesive, Toyota approved.
Terostat 06-1201
Terostat 10000 Series
Terostat 10100 Series
Terostat 10200 Series
Terostat 11000 Series
Terostat 12000 Series
Terostat 15000 Series
Terostat 15100 Series
Terostat 19000 Series
Terostat 27000 Series
Terostat 28000 Series
Terostat 7700 Adhesive
Terostat 962-US
Terostat PT 13000 Series
Terotex 3599-5 PVC underbody coating
Terotex PTA-184B Lightweight, high performance PVC underbody coating and anti-chip coating
Terotex PTA-188-1 Paint shop underbody/interior coating
Turco Form Mask 5580-G
Turco® 5668™
Turco® 5884™
Turco® 5948-DPM™
Turco® 5948-DPM™ Thick
Turco® 5948-R™
Turco® 6776-LO™
Turco® 6840-S™
Turco® Deoxidizer® 16™
Turco® Deoxidizer® 6™
Turco® WO #1™