Marine Emergency Repair & Maintenance Solutions

A "must have" solution kit for general maintenance and emergency repair for every vessel. The Marine Maintenance & Emergency Repair Kit provides solutions from simple vibration-proof bolt fastening to emergency pipe repair in open sea. Applications include thread locking, thread sealing, retaining, flange sealing & gasketing, emergency metal rebuilding & pipe repair, anti seize and bonding.


Products & Descriptions

Loctite® Fixmaster® Underwater Repair Epoxy This putty-like material is ideal for plumbing, irrigation and marine applications because it is unaffected by chlorinated or salt water. Will stick to wet surfaces. Ideally suited for underwater repairs. Sets in 15 minutes.
Loctite® 222 Threadlocker

Ideal for fastener diameters of ¼" (6 mm) and smaller, long engagement length fasteners, and components requiring occasional adjustment. Apply to threaded parts before assembly. Controlled lubricity for accurate clamp loads. Parts can be disassembled with hand tools. Approved for use in or around food processing areas.

Loctite® 243® Threadlocker

A general purpose, medium strength threadlocker with improved oil tolerance. Suitable for ¼" to ¾" diameter (6 to 20mm) fasteners.

Loctite® 277® Threadlocker

Withstands temperatures to 450°F. Provides a fast cure on most surfaces, including "as received" fasteners. Recommended for bolts up to 1½" (36 mm) in diameter. Heat and hand tools are required for disassembly.

Loctite® 290® Threadlocker

A low viscosity, medium strength threadlocker for pre-assembled bolts up to ½" (12 mm) to secure them in place. Penetrates threads by capillary action. Seals porosities in welds and metal parts. Secures set screws and other assemblies after setting are completed. Seals welds and porous metal parts. Protects threads from rust and corrosion. Localized heating and hand tools are needed for disassembly.

Loctite® 401™ Prism® Instant Adhesive

Designed for the assembly of difficult-to-bond materials that require uniform stress distribution. Particularly suited for bonding a wide range of materials, including metals, plastics, and elastomers. Also formulated for faster cure speeds on dry or acidic surfaces and substrates.

Loctite® 454™ Prism® Instant Adhesive

Designed for the assembly of difficult-to-bond materials that require uniform stress distribution. Particularly suited for bonding porous or absorbent materials. Also formulated for faster cure speeds on dry or acidic surfaces and substrates.

Loctite® 495™ Super Bonder® Instant Adhesive

Designed to bond rubber, metal, and plastic parts with gaps to 0.004"

Loctite® Fixmaster® Metal Magic Steel™

Steel epoxy in stick form. Cut off a section, knead, and apply to leaking pipes or damaged equipment. Cures in 10 minutes. NSF 61 approved for potable water applications.

Loctite® Fixmaster® Underwater Repair Epoxy

This putty-like material is ideal for plumbing, irrigation and marine applications because it is unaffected by chlorinated or salt water. Will stick to wet surfaces. Ideally suited for underwater repairs. Sets in 15 minutes.

Loctite® Pipe repair kit

Urethane impregnated fiberglass tape, activated by water, for reliable, temporary repairs of metal, plastic, and composite pipes. Includes Loctite® Fixmaster® Metal Magic Steel™ epoxy stick, urethane impregnated fiberglass tape, and gloves. Cures in 30 minutes.

Loctite® Form A Thread® Stripped Thread Repair Kit

Permanently repairs stripped threads and fasteners in five minutes (up to SAE Grade 5 English and 8.8 metric). Allows up to 1,538 in lbs. torque (on 1" bolt) and 300°F. Resists most shop fluids.

Loctite® 515™ Gasket Eliminator® Flange Sealant

Makes flexible gaskets for rigid machined flanges with less than 0.050" gap. Flexes when flanges move in-service.

Loctite® 574™

Fast and instant curing provide sealing to rigid & semi-rigid metal flanges with excellent oil resistance and water/ glycol resistance.

Loctite® 5699™ Grey,
High Performance RTV Silicone Gasket Maker (70gm)
For rigid flange assemblies. Excellent fluid resistance. Easy to dispense, non-corrosive, low odor, low volatility. Grey in color.

Loctite® 542™ Thread Sealant

A liquid sealant recommended for sealing the fine threads of hydraulic and pneumatic connectors.

Loctite® 577™ Thread Sealant

Medium strength, general purpose sealant for use on coarse, threaded components.

Loctite® Marine Grade Anti-Seize (80oz)

Metal-Free formulation to protect assemblies exposed directly or indirectly to fresh and salt water, Loctite® Marine Grade Anti-Seize works especially well in high humidity conditions. It has excellent lubricity, superior water-washout and water spray resistance, and prevents galvanic corrosion. Protects in temperatures from -20°F to 2400°F (-29°C to1315°C).

Loctite® 603™ Retaining Compound

A retaining compound tolerant of oil and other contamination. Seals and secures cylindrical assemblies up to 0.005" diametral clearance. Fixtures in 10 minutes. Prevents fretting and corrosion of metal assemblies.

Loctite® 648™ Retaining Compound

A retaining compound recommended for continuous working temperatures up to 300°F. Fills gaps up to 0.006" diametral clearance. Fixtures in 5 minutes.

Loctite® Fixmaster® 2000° Putty

Single-component putty designed to fill and restore damaged metal and fill cracks in environments that will see 2000°F. Water-based and non-toxic. Typical applications include header, manifold and cast iron repair.

Loctite® ODC-Free Cleaner & Degreaser

A non-aqueous, hydrocarbon-based solvent designed for cleaning and degreasing surfaces to be bonded with adhesives, as well as for general purpose industrial cleaning. Safe on aluminum, rubber and most plastics, and will not cause flash rusting on water sensitive parts. Dries residue-free. Contains no ozone-depleting compounds.

Yuk Off Orange®

Yuk-off Orange® is the first in a new generation of and cleaning products designed not only to clean more effectively but also to protect the skin and be kind to our environment. Using the cleaning ability of high quality natural citrus oils, Yuk-Off Orange cleans hands thoroughly without the dangers associated with the harsh chemicals normally found in other hand cleaners.

Loctite® 660™ Quick Metal® Retaining Compound

A creamy, non-running gel that is applied onto cylindrical parts to fill surface imperfections and repair worn areas. It contains no metal but once assembled hardens to a strength that often doubles that of a press fit. Use Loctite® 660™ to salvage worn metallic parts or to keep machinery running until new parts arrive. Use to 300°F (149°C).

Loctite® 7649™ Primer N™

A solvent-based primer that features very long on-part life. Use to speed the cure of all Loctite® anaerobic products and ensure proper cure on inactive metals. Ideal for cure conditions below room temperature.

Loctite® Freeze and Release

Fast acting corrosion release. Instantly chills seized and rusted parts (bolts, nuts, studs) down to -45°F. The exceptional shock-freeze action causes microscopic cracks in the layer of rust, allowing the lubricating ingredient to wick directly into the rust by capillary action.

For Marine Emergency Repair & Maintenance Solutions Brochure

Service & Advice
Dakar Series